In-Duct UV Air Treatment System
This product has been updated to the RMax and SRMax found on our webpage.
The Sanuvox R+ represents an evolution in UV In-Duct Air Treatment. The high-efficiency patented design destroys airborne bio-chemical contaminants while providing important user information on the 3” Back-Lit LCD display.
Installed into the return or supply plenum, the Sanuvox proprietary process maximizes dwell (contact) time between the air and UV energy. With the ability to treat homes up to 4,000 sq.ft., the Sanuvox R+ represents the very best in UV Air Purification.
The Sanuvox R Plus air purifier uses ultraviolet light to destroy bacteria, viruses, mold, mildew and chemical contaminants. It also neutralizes odors in the air including smoke and cleaning solvents. A display on the unit lets you know when it is time to change the filter or ballast. The air within our homes continually circulates through the ventilation system. To install the Sanuvox and cleanse this indoor air, cut out an 8″ piece of your furnace ductwork (typically on the return air side), and replace with the Sanuvox air purifier, then plug the unit in to a standard electric outlet. After an hour or two of being installed, the furnace blower will have circulated the air through the in-duct purifier enough times to bring the homes contamination level down drastically.
The unit’s J-shaped UV lamp is mounted inside a reflector to allow for the maximum percentage of airflow purification.The UV portion of the lamp has been designed to operate at such low levels that only an extremely low level ozone is released into the environment. Besides changing the lamp every three years, no other maintenance is required.